Zoeller® 267-0002 Waste-Mate 260 Non-Automatic/Manual Operation Submersible Pump, 1/2 hp, 115 VAC, 2 or 3 in NPT Outlet, Cast Iron, 10.4 A, 1 ph
Part #: ZON267
MFG #: 267-0002
Our Model N267 Sewage Pump with a is designed to remove raw sewage and wastewater in sewage ejector applications. The professional-grade, 1/2 HP N267 is a time-tested and reliable sewage pump. Known as the "Waste-Mate," the N267 is a nonautomatic pump requiring a piggyback float switch or control panel for operation. Either option allows you to set the on and off point of the pump in the field. The pump's vortex impeller allows it to pass 2" spherical solids. The impeller's clearance in relation to the pump housing allows water and solids to pass freely through the pump. This combination of design features lessens the chance of clogging and downtime. The Model 267's motor housing, pump housing, and base are each constructed of cast iron. The pump's identification tag, handle, switch and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 267 is able to withstand the most demanding sewage ejector applications. Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.
Brand : Zoeller®
Amperage Rating : 10.4 A
Bearing Type : Sleeve
Cord Type : 3-Wire Neoprene
Country of Origin : US
Dimensions : 14-5/16 in H
Features
- Float operated 2-pole mechanical switch
- Durable cast construction, ASTM Class 25 cast iron switch case and pump housing
- Non-clogging vortex impeller design, engineered plastic impeller with metal inserts (1 ph)
- Not affected by materials normally found in drainage and sewage pumps
- Stainless steel screws, bolts, handle, guard, arm and seal assembly
- Neoprene square ring and gasket
- Oil filled, hermetically sealed motors
- Oil-lubricated bearings
- Carbon and ceramic shaft seal
- Corrosion-resistant, powder coated epoxy finish
- Completely submersible
- Watertight and dust-tight
- Automatic reset thermal overload protection (1 ph only)
- 12 in on point, 4 in off point
- High water alarms available
- 10 in auto/15 in non auto, 3-wire neoprene cord and plug
- Cap/motor housing/pump housing cast iron, base cast iron or engineered plastic
- Upper and lower sleeve bearing
- Engineered plastic with metal insert impeller, Stainless steel hardware, AISI 1215 cold rolled steel motor shaft, Neoprene gasket
- Submersible sewage/effluent or dewatering pump
Application
- Residential
- Light Commercial Sewage
- Dewatering
- New Construction and Wastewater/Lift Stations
Includes
- Stainless Steel Handle and 15 ft Cord with Plug
Standards/Approvals/Certifications
- cCSAus Certified
- CSA C22.2 108
- SSPMA Certified
- UL 778