Bradford White® TTW® RG1PV50S6N-475 Hi-Alt Gas Water Heater, 40000 Btu/hr Heating, 50 gal Tank, Natural Gas Fuel, Power Vent, 43 gph Recovery, Domestic
BWRG1PV50S6N
- Country of Origin: US
- Dimensions: 22 in Dia x 27-3/16 in D x 58-1/4 in H
- Domestic/Import: Domestic
- Energy Factor: 0.63
- Fuel Type: Natural Gas
- Gas Connection: 1/2 in
- Heating Capacity: 40000 Btu/hr
- Manufacturer Name: Bradford White
- Pressure Rating: 150 psi
- Recovery Rate: 43 gph
- Ultra Low NOx: No
- Vent Size: 2 x 3 in
- Vent Type: Power
- Water Connection: 3/4 in NPT
Our Power Vent (TTW®) models are power vented for positive exhaust. They offer greater installation flexibility with the ability to vent through a wall or roof, with either 2 or 3 in PVC, ABS or CPVC pipe. They offer an increased amount of hot water available at a usable temperature in less time than normal.
- Features and More
Features
- Bradford White® ICON System™: Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC)
- Enhanced performance: Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
- Advanced temperature control system: Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
- Intelligent diagnostics: An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
- Power vent water heater: Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall
- Powerful blower motor: Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations
- Horizontal and vertical venting: PVC, ABS or CPVC
- Advanced ScreenLok® technology flame arrester design: Flame arrester is designed to prevent ignition of flammable vapor outside of the water heater
- Flammable vapor sensor: Electronic sensor prevents burner operation if flammable vapors are detected
- Maintenance free: No regular cleaning of air inlet openings or flame arrester is required under normal conditions
- Sight window: Offers a view into the combustion chamber to observe the operation of the pilot and burner
- Factory installed Hydrojet® total performance system: Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
- Vitraglas® lining
- Insulation system: Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
- Water connections: 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
- Factory installed heat traps: Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
- Low restriction brass drain valve: Durable tamper proof design
- Protective magnesium rod
- High altitude
- FVIR defender safety System®
Application
- Residential Application
Includes
- 10 ft 120 VAC Power Cord
Standards/Approvals/Certifications
- AHRI Certified
- ANSI Z21.10.1-2014
- ASHRAE 90.1b
- CEC Listed
- CSA 4.1-2014
- CSA International (Formerly AGA/CGA)
- CSA LLC - Low Lead Compliant
- Massachusetts Approved
- NSF 372
- PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov
Warranty
- 6 Years Limited on Tank/6 Years Limited on Component Parts