WATTS®

WATTS® 0881378 Air Gap, For Use With Model 009/909/LF909 1-1/4 to 3 in Reduced Pressure Zone Assembly, 009/LF009M1 1-1/4 to 2 in Reduced Pressure Zone Assembly and 009/LF009M2 2 in Reduced Pressure Zone Assembly, Cast Iron, Import

WAAGF MFG #: AG-F
WATTS® 0881378 Air Gap, For Use With Model 009/909/LF909 1-1/4 to 3 in Reduced Pressure Zone Assembly, 009/LF009M1 1-1/4 to 2 in Reduced Pressure Zone Assembly and 009/LF009M2 2 in Reduced Pressure Zone Assembly, Cast Iron, Import
  • Country of Origin: IN
  • Dimensions: 4-3/8 in W x 6-3/4 in H
  • Domestic/Import: Import
  • Manufacturer Name: Watts Water Technologies
  • Suitable For Use With: Model 009/909/LF909 1-1/4 to 3 in Reduced Pressure Zone Assembly, 009/LF009M1 1-1/4 to 2 in Reduced Pressure Zone Assembly and 009/LF009M2 2 in Reduced Pressure Zone Assembly
This air gaps for reduced pressure zone assembly, 1 1-4-3 in series 009 and 909, 1-1/4-2 in series 009M1, and 2 in 009M2, provide an unobstructed, physical separation between the discharge end of a potable water supply line and an open receiving vessel. The installation of an air gap and drain line are recommended on reduced pressure zone assemblies. It can be installed vertically or horizontally (vent elbow required for vertical installation).
  • Features and More

Features

  • For vertical or horizontal installation
  • 2 in mechanical joint x 2 in FNPT

Standards/Approvals/Certifications

  • ASSE Listed
  • FM Approved
  • NSF Approved
  • UL Listed
  • ULC Listed
  • USC Certified
  • WQA Certified

Warranty

  • Limited