Cleanfit Blue Monster® 70885 Non-Toxic Thread Seal Tape, 1429 in L x 1/2 in W x 0.0035 in THK, PTFE
MIL70885
MFG #: 70885
- Color: Blue
- Length: 1429 in
- Manufacturer Name: The Mill-Rose Company
- Maximum Operating Temperature: 500 deg F
- Minimum Operating Temperature: -400 deg F
- Pressure Rating: 10000 psi
- Thickness: 0.0035 in
- Width: 1/2 in
Blue Monster PTFE thread seal tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1429 in roll. That's 5 times more tape than conventional rolls of low density thin tapes. Fewer wraps are necessary to affect a leak proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.
- Features and More
Features
- Compatible with a broad range of gases and liquids
- Compatible with a broad range of piping materials will not harden or crack on the joints
- Effective across a broad range of temperatures and pressures
- Acts as a thread lubricant and anti-seize
- Prevents electrolytic corrosion of threads
- No curing time
- Unlimited shelf life
- Non-flammable
- 99.6% PTFE <0.4 percent composition
- >100% elongation
- 15 N/sq-mm tensile strength
- Pressure rating Mill-Rose blue monster thread sealing tape has been used to seal fittings carrying water and oil at pressures up to 10000 psi or 69000 kPa
- -450 to 500 deg F PTFE is completely stable up to 500 deg F
- Decomposition is slow up to 750 deg F
- Although decomposition will occur on contact with naked flames
- Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used
- https://youtu.be/qOMdn5G2WLg
Application
- For concentrated and dilute acids
- alcohols
- gasohol
- aliphatic solvents
- aromatic solvents
- chlorinated solvents
- liquid ammonia
- concentrated caustics
- compressed air
- steam
- water
- cutting oils
- diesel fuel oil
- ethylene glycol
- glycerin
- fatty acids
- heating oils
- kerosene
- hydraulic fluids
- hydraulic oils
- gaseous and liquid hydrogen
- gaseous and liquid inert gases
- jet fuel
- ketones
- petroleum solvents
- liquid petroleum gas
- natural gas
- mineral oils
- vegetable oils
- gaseous and liquid nitrogen and liquid soap
Standards/Approvals/Certifications
- UL Listed