Zoeller® 267-0054 Waste-Mate 260 Automatic Submersible Pump, 1/2 hp, 230 V AC, 2 or 3 in NPT Outlet, Cast Iron, 5.5 A, 1 ph
Part #: ZOM267
MFG #: 267-001
Our Model BE267 Sewage Pump is designed to remove raw sewage or effluent in residential sewage or septic system applications. The professional-grade, 1/2 HP Model 267 is known for its dependability. The BE267 is a nonautomatic pump equipped with a single piggyback float switch. The piggyback float switch allows you to set the on and off point of the pump in the field. This is ideal in an application with a deep sump pit or pump tank. The Model 267’s switch case, motor housing, and pump housing are each constructed of cast iron. The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 267 is able to withstand the demands of residential sewage ejector applications. Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.
Brand : Zoeller®
Amperage Rating : 10.4 A, 5.5 A
Bearing Type : Sleeve
Cord Type : 3-Wire Neoprene
Country of Origin : US
Dimensions : 14-5/16 in H
Features
- Float operated 2-pole mechanical switch
- Durable cast construction, ASTM Class 25 cast iron switch case and pump housing
- Non-clogging vortex impeller design, engineered plastic impeller with metal inserts (1 ph)
- Not affected by materials normally found in drainage and sewage pumps
- Stainless steel screws, bolts, handle, guard, arm and seal assembly
- Neoprene square ring and gasket
- Oil filled, hermetically sealed motors
- Oil-lubricated bearings
- Carbon and ceramic shaft seal
- Corrosion-resistant, powder coated epoxy finish
- Completely submersible
- Watertight and dust-tight
- Automatic reset thermal overload protection (1 ph only)
- 12 in on point, 4 in off point
- High water alarms available
- 10 in auto/15 in non auto, 3-wire neoprene cord and plug
- Cap/motor housing/pump housing cast iron, base cast iron or engineered plastic
- Upper and lower sleeve bearing
- Engineered plastic with metal insert impeller, Stainless steel hardware, AISI 1215 cold rolled steel motor shaft, Neoprene gasket
- Submersible sewage/effluent or dewatering pump
Application
- Residential
- Light Commercial Sewage
- Dewatering
- New Construction and Wastewater/Lift Stations
Includes
- 2-Pole Mechanical Switch
- Stainless Steel Float Guard and Switch Arm
- Solid Buoyant Polypropylene Float
- Stainless Steel Handle and 15 ft Cord with Plug
Standards/Approvals/Certifications
- cCSAus Certified
- CSA C22.2 108
- SSPMA Certified
- UL 778