Tekmar®

Tekmar® 003 Relay, DPDT Contact, 24 VAC V Coil, Import

TEKMAR003
Tekmar® 003 Relay, DPDT Contact, 24 VAC V Coil, Import
  • Coil Voltage: 24 VAC
  • Contact Form: DPDT
  • Contact Rating: 10 mA at 1 VDC
  • Country of Origin: CA
  • Dimensions: 1-9/16 in W x 2-3/8 in D x 3 in H
  • Domestic/Import: Import
  • Frequency Rating: 50/60 Hz
  • Manufacturer Name: Watts Water Technologies
  • Number of Poles: 2
  • Power Rating: 2.7/2.3 VA
The Relay 003 is a 24 VAC coil DPDT (double pole double throw) relay that is used to isolate electrical loads and allow higher current ratings than the on board relays found on tekmar controls. It can be used in applications ranging from doubling the capability of a single output (e.g. energize a pump as well as provide a boiler demand from one output) to allowing a pump to be used that draws more than the control s specified relay rating. This product uses a 24 VAC coil that once energized, closes 2 normally open contacts, and opens 2 normally closed contacts.
  • Features and More

Features

  • Double pole double throw relay (DPDT) to isolate electrical loads
  • Easy to replace (ice cube style - no need to remove wiring)
  • LED to indicate when energized
  • Test button for easy test and manual override
  • Isolate electrical loads
  • Test tab for easy test and manual override
  • Relay contacts (max.) - 10 A resistive at 250 VAC NO, NC, 10 A resistive at 30 VDC NO, NC, 7 A inductive at 250 VAC
  • Relay contacts (min) - 10 mA 1 VDC

Application

  • Indoor Applications

Standards/Approvals/Certifications

  • CSA/cUS Certified

Warranty

  • 3 years Limited