Part #: PCZDB1024

Features and More

Features/Benefits

• The ZD have a Minimum Position Setting that Allows the Damper to Remain Open to a Pre-Set Position Instead of Closing Off Fully
• This Minimum Position Provides for a Small Amount of Air to be By- Passed through the Damper to Lessen the Need for a Separate By- Pass Damper and Provide Continual Air Circulation
• To Set the Minimum Position, Set when there is No Power to the Damper and it is in the Open Position
• Loosen the Long Minimum Position Set Screw and Move to a Desired Setting Shown on the Minimum Position Label and Re-Tighten
• When the Damper is Powered Closed the Minimum Position Screw will Stop the Damper at the Position Set

Documents