Sharkbite® SB013528 2XL Large Diameter Pipe Reducing Coupling, 1-1/4 x 1 in Nominal, Push-Fit End Style, Brass, Import
Part #: SHARKCOUPLK
MFG #: SB013528
These large-diameter (1-1/4 in. up to 2 in.) reducing couplings make it easy to reduce varying sizes of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation. Large Diameter PEX Stiffeners are required when connecting to PEX tubing.
Brand : Sharkbite®
Country of Origin : CN
Dimensions : 3.26 in L
Domestic/Import : Import
End Style : Push-Fit
Fitting/Connector Type : Reducing Coupler
Features
- Quick connect - No tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, mark the pipe for correct depth and push to get a pressure ready connection every time
- Quick disconnect - Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs and rotate clockwise to lock the open position leaving both hands free, you can now remove the pipe
- SAFE-recessed release collar - Commercial SharkBite® require a special demount tool and cannot be accidentally disconnected/released
- Extensive range including slip feature on couplings and tee's - When repairing or tapping into existing pipe with push-fittings you must be able to either move the fitting or the pipe to ensures the pipe is engaged fully into the fitting, with rigid pipe like copper the only way with push-fittings is to have a slip feature to allow easy installation when tapping into existing pipe
- Easy installation unlike the tool intensive connection methods there is no need to send multiple fitters to a job, SharkBite® commercial has been designed to be installed or removed by one person
- All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further
- Wet or dry - No waiting for copper tube to dry before soldering or glue to cure, SharkBite® makes an instant connection in seconds
- No tools - Unlike alterative tool intensive connections systems, SharkBite® has no special tooling required for installation
- No time - Fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal
- No waste - Should you make an error or simply want to change your installation, no problem for SharkBite®, simply remove and re-use, (fitting used for repeated testing must not be used in any permanent application)
- Fittings cannot be disassembled - SharkBite® commercial fitting are factory assembled and components cannot be removed
- Long pipe engagement - Provides pipe support against lateral pipe forces
- Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372
- Suitable for underground installation subject to local code authorities/inspector
- Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation
- Design for use on ASTM B88 hard drawn and annealed copper type K, l or M, ASTM F876 and F877 pex and ASTM D2846/D2846M CPVC water pipe
- Chloramine resistant EDPM O-ring
- Copper tube liner
- 316 stainless steel grab ring
- Acetyl copolymer SharkBite® cartridge assembly
- Watch Video
Application
- For use in commercial and residential applications for potable water
- hydronic heating
- chilled water and general water distribution for irrigation
Standards/Approvals/Certifications
- ASSE 1061
- CSA B125.3
Warranty
- 25 years Limited