Saniflo® 081 Macerator Pump, 1.28 gpf Flow Rate, 2 in Inlet, 0.5 hp
Part #: SANIACCESS2
MFG #: 081
The Saniaccess®3 is a 1/2 hp pump system used to install a complete bathroom up to 15 ft below the sewer line or even up to 150 ft away from a soil stack. It incorporates a macerating system which can handle human waste and toilet paper in residential applications. The blade is made out of a hardened stainless steel material which eliminates the need for any service or replacement.
Brand : Saniflo®
Amperage Rating : 4.5 A
Country of Origin : FR
Dimensions : 18-3/4 in W x 6-3/4 in D x 10-3/4 in H
Frequency Rating : 60 Hz
Horsepower : 0.5 hp
Features
- The Saniaccess® 2 is ideal to create an additional half-bathroom anywhere
- For half bathroom applications
- 15 ft vertical and/or 150 ft horizontal discharge
- Quietest pump on the market
- Easy dual access service panels
- Discharges the waste through a 3/4 or 1 in rigid pipe
- Non-return valve is included on the discharge elbow assembly provided with the system
- Elbow can be rotated 360 deg depending on the discharge installation
- Has been designed with a 1-1/2 in vent connection on the top of the lid
- All plumbing codes require connection to a vent system
- Must be connected to Saniflo® 1.28 gpf rear discharge toilet
- Will also discharge gray water from any sink, bath/shower or urinal
- Wastewater will drain into the system via two 2 in inlets with built-in check valves on either side of the housing, note that when adding a bathtub/shower, the base should be raised up by a minimum of 6 in off the floor
- 0.5 hp oil-filled thermally protected motor
- 45 uF capacitor
- 51 in power cord
- ≤ 53 dBA noise level measured at 3 ft
Application
- Residential Applications
Standards/Approvals/Certifications
- ADA Compliant
- ASME A112.3.4
- CSA B45.9
- UPC Listed
- WaterSense EPA Certified