Simpson Strong-Tie® DIA37S Short Threaded Drop-In Anchor, 3/8 in, 1/2 in Drill, Carbon Steel, 1-9/16 in D Min Embedment
Part #: ADI37S
MFG #: DIA37S
Drop-In anchors are internally threaded drop-in expansion anchors for use in flush-mount applications in solid base materials. Available in stainless steel (DIA), short (DIAS) or coil-thread (DIAC) versions. Minimum thread engagement should be equal to the nominal diameter of the threaded insert.
Brand : Simpson Strong-Tie®
Bolt/Rod Size : 3/8 in
Drill Size : 1/2 in
Manufacturer Name : Simpson Strong-Tie
Material : Carbon Steel
Minimum Embedment Depth : 1-9/16 in
Features
- Lipped edge (DIAS) eliminates need for precisely drilled hole depth
- Available in coil-thread version for 1/2 in and 3/4 in coil-threaded rod
- Short length (DIAS) enables shallow embedment to help avoid drilling into rebar or pre-stressed/post-tensioned cables
- Short drop-in anchors include a setting tool compatible with the anchor to ensure consistent installation
- Anchor body meets minimum 70000 psi tensile
- Expander plug meets minimum 50000 psi tensile strength
- A dedicated setting tool is included
- 2600 to 2700 deg F freezing/melting point
- The allowable loads are based on a safety factor of 4
- Allowable loads may not be increased for short-term loading due to wind or seismic forces
- Anchors were installed with a 1 in offset from the centerline of the flute
Application
- For flush mount applications in solid base materials
Standards/Approvals/Certifications
- OSHA 29 CFR 1910.1000
- Federal Specification A-A-55614
- Type I
- FM 3017082
- UL File Ex3605