• Brand: Bradford White®
  • Inlet/Outlet Connection: 3/4 Inch Threaded
  • Applicable Standard: CSA
Our Power Vent (TTW®) models are power vented for positive exhaust. They offer greater installation flexibility with the ability to vent through a wall or roof, with either 2 or 3 in PVC, ABS or CPVC pipe. They offer an increased amount of hot water available at a usable temperature in less time than normal.
  • Features and More


  • Powerful Blower Motor - Exclusively Featuring the Aquavent Max from Fasco is the Quietest Blower Motor in the Industry, This New Blower is a Lower Profile than Previous Versions and Features a More Robust Electrical Connection
  • Horizontal and Vertical Venting - Designed for Installations where Atmospheric Units can Not be Used, Exhaust Gases are Vented Under Positive Pressure Directly Out of the Building Through the Roof or the Wall with PVC, ABS Plastic or CPVC
  • Bradford White Icon System™ - Intelligent Gas Control with Spark to Pilot Ignition System Eliminates the Constant Burning Pilot, This Results in Savings of Pilot Gas During Standby Periods (120 Volt AC)
  • Enhanced Performance - Proprietary Algorithms Provide Enhanced First Hour Rating and Tighter Temperature Differential
  • Advanced Temperature Control System - Microprocessor Constantly Monitors and Controls Burner Operation to Maintain Consistent and Accurate Water Temperature Levels
  • Intelligent Diagnostics - An Exclusive Green LED Light Prompts the Installer During Start-Up and Provides 10 Different Diagnostic Codes to Assist in Troubleshooting
  • Pilot on Indication - Flashing Green LED Provides Positive Indication that Pilot is On
  • Separate Immersed Thermowell - High Strength Advanced Polymer Composite Thermowell Provides Isolation between Electric Temperature Sensor and Surrounding Water, No Need to Drain the Tank when Removing Gas Valve
  • Advanced Screenlok Technology Flame Arrestor Design - Flame Arrestor is Designed to Prevent Ignition of Flammable Vapor Outside of the Water Heater
  • Flammable Vapor Sensor - Electronic Sensor Prevents Burner Operation if Flammable Vapors are Detected, The Sensor will also Prevent Operation if there is Ongoing Flammable Vapors Burning Inside the Combustion Chamber
  • Maintenance-Free - No Regular Cleaning of Air Inlet Openings or Flame Arrestor is Required Under Normal Conditions
  • Sight Window - Offers a View into the Combustion Chamber to Observe the Operation of the Pilot and Burner
  • Factory-Installed Hydrojet Total Performance System - Sediment Reducing Device that also Increases First Hour Rating of Hot Water While Minimizing Temperature Build-Up in Tank
  • Vitraglas Lining - an Exclusively Engineered Enamel Formula that Provides Superior Tank Protection from the Highly Corrosive Effects of Hot Water, This Vitraglas Formula is Fused to the Steel Surface by Firing at a Temperature of Over 1600 Deg F
  • Insulation System - Non-CFC Foam Covers the Sides and Top of the Tank, Reducing Heat Loss, This Results in Less Energy Consumption, Improved Efficiencies and Jacket Rigidity
  • Factory-Installed Heat Traps - Design Incorporates a Flexible Disk that Reduces Heat Loss in Piping and Eliminates the Potential for Noise Generation
  • Energy Star® Rated
  • Lead-Free
  • AHRI Certified


    Powerful Blower Motor, Bradford White ICON System, Advanced Temperature Control System, Separate Immersed Thermowell, Advanced ScreenLok Technology Flame Arrestor Design, Flammable Vapor Sensor, Sight Window, Factory-Installed Hydrojet Total Performance System, Factory-Installed Heat Trap, Hydrojet Total Performance System