• Brand: Bradford White®
  • Inlet/Outlet Connection: 3/4 Inch Threaded
  • Applicable Standard: CSA, ETL
  • Pressure Rating: 150 psi
As with the energy saver atmospheric combustion model, its direct vent counterpart is also designed for mobile homes. This version takes combustion air in from outside and then vents combustion gases directly back outside.
  • Features and More


  • Housing and Urban Development - this Water Heater is Designed in Accordance with H.U.D. and is Certified for Installation in a Manufactured Home Only and Must be Installed in an Enclosure that will Completely Separate the Water Heater Combustion and Venting System from the Dwelling Interior
  • Flue Baffle - Designed to Maximize the Amount of Heat Absorbed in the Lower Portion of Tank, Minimizes Air Movement in the Heater During Standby Periods to Decrease Heat Loss up the Flue
  • Heat Trap - Installed on Hot Water Outlet to Minimize Heat Loss through Piping
  • Vitraglas Lining - an Exclusively Engineered Enamel Formula that Provides Superior Tank Protection from the Highly Corrosive Effects of Hot Water, This Vitraglas Formula is Fused to the Steel Surface by Firing at a Temperature of Over 1600 Deg F
  • Fully Automatic Controls - Fast Acting Surface Mount Thermostat with High Limit Energy Cut-Off (Manual Reset) for Safety
  • Insulation System - 2 Inch Non-CFC Foam Insulation Covers the Sides and Top of the Tank, Reducing Heat Loss, This Results in Less Energy Consumption, Improved Efficiencies and Jacket Rigidity
  • Protective Magnesium Anode Rod - Provides Added Protection Against Corrosion for Long-Term, Trouble-Free Service
  • Convertible Gas Control - Easily Convertible Control for Use with Either Propane or Natural Gas
  • Lead-Free
  • AHRI Certified


    Flue Baffle, Heat Trap, Fully Automatic Control, Protective Magnesium Anode Rod