3/4" Teflon Thread Seal Tape 1429" Blue Monster
MIL70886
MFG #: 70886
- Brand: Cleanfit Blue Monster®
- Color: Blue
- Density: 0.8 g/cu-cm
- Length: 1429 in
- Material: PTFE
- Pressure Rating: 10000 psi
- Temperature Rating: -400 to 500 deg F
- Thickness: 0.0035 in
- Type: Non-Toxic
- Width: 3/4 in
Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That's 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.
- Features
- Video
- Compatible with a broad range of gases and liquids
- > 100 percent elongation
- 15 N/sq-mm tensile strength
- Pressure rating: Mill-Rose blue monster thread sealing tape has been used to seal fittings carrying water and oil at pressures up to 10000 psi or 69000kPa
- Temperature range: -450 to 500 deg F PTFE is completely stable up to 500 deg F
- Decomposition is slow up to 750 deg F
- Although decomposition will occur on contact with naked flames
- Note: pressure ratings are relative to the quality and torque of the fittings and the amount of tape used
- Compatible with a broad range of piping materials will not harden or crack on the joints
- Effective across a broad range of temperatures and pressures
- Acts as a thread lubricant and anti-seize
- Prevents electrolytic corrosion of threads
- No curing time
- Unlimited shelf life
- Non-flammable
- 99.6 percent PTFE < 0.4 percent composition